‹ Back

Ink changeover DG → WF

The manufacturer of the Memjet inks is phasing out the previous ink generation DG in stages and replacing it with the new type WF over. Here you can find out what this means for your machine, and what you need to do.

The key points in brief

  • Same properties: The new WF ink has the same properties as the previous DG ink.
  • Can be used in parallel: WF and DG ink can be used in parallel, so an immediate, complete changeover is not necessary.
  • Existing stock runs out: Existing DG stock will be used up gradually; new deliveries mainly contain WF ink until stocks have been fully converted.
  • No flushing required: Flushing the ink system is not required, it is enough to update the firmware and driver.

What you need to do

For your printer to process the new WF ink, you need the current Firmware and the current Drivers for your model. You will find the installation instructions in the relevant Operator Manual (user manual) – also available in the Download centre.

Minimum firmware required per model

Model Firmware (minimum) Drivers
AstroJet S1 1.7.0 latest version
AstroJet L1 1.7.0 latest version
AstroJet M1 R16.1 latest version
AstroJet M1C R16.1 latest version

Go to the Download centre: firmware, drivers & manuals

Select your machine there; the versions recommended for WF ink are marked “★ Recommended”.

Any more questions?

We are happy to support you with the changeover. Write to us at kontakt@brunner-mkv.de or call: +49 9187 409707-0.