Printing systems
Industrial inkjet printing systems for marking and addressing
Inkjet printing systems for variable data printing on envelopes, cartons, labels and packaging. We advise you and test with your material.
Looking for the right machine? We will advise you personally and, if you wish, print a free sample with your data.
BUSKRO Quantum
High-speed UV printing system for flexible, reliable printing at up to 1,200 dpi.
View details
BUSKRO Atom
UV printing system for reliable printing at up to 600 dpi.
View details
BUSKRO Apollo
Printing system for sharp-edged printing of addresses, barcodes and other text information.
View details
ASTROJET SP2
Full-colour printing system for mailers, letterheads and flat cartons up to 12 mm, as a stand-alone unit or inline behind the inserting machine.
View details
ASTROJET S1
Full-colour printing system for envelopes, mailers and media up to 10 mm thick, with up to 9,000 envelopes per hour.
View details
BUSKRO ARGO
Modular inkjet printhead with HP technology: 108 mm print width per module, up to 1,200 dpi and 3.0 m/s, expandable to 64 modules.
View details
Amica Systems Venus 108
The inkjet printing system prints mailings, invoices, mailers and packaging quickly and to the highest quality, with barcodes, EAN codes, QR codes and other variable data.
View details
Kirk-Rudy FireJet 4c
Printing system for long runs up to A3 print width: four colours with water-based pigment ink, up to 46 metres per minute, material up to 20 mm thick.
View details
ASTROJET L1
Label printer for roll material up to 216 mm print width: print colour labels in-house, individually.
View details
brunner br-300-4c
Prints cartons, mailers and folding cartons up to 50 mm thick in four colours, with HP technology, 1,200 × 1,200 dpi and low ink costs.
View details
GSI Colorize CMYK+W
Printheads for the running packaging line: CMYK plus white underprint in a single pass, up to 304 metres per minute, including on brown corrugated board.
View details
GSI NoLabel
Prints the shipping label directly onto the carton: black on white underprint, in a single pass, up to 304 metres per minute.
View details
ASTROJET 140
The address printer with four printheads in one print area for fast, sharp-edged printing.
View details
ASTROJET 160
The address printer with six printheads in two print areas for fast, sharp-edged printing.
View details
ASTROJET 180
The address printer with eight printheads in three print areas for fast, sharp-edged printing.
View details
What an industrial inkjet printing system does
An industrial inkjet printing system applies text, codes, logos and images without contact to products passing by. It serves as a marking system for batch codes and barcodes, as an address printer for mailings or as a colour printing system for packaging. Each piece can receive different content, which is why these systems are suited to variable data printing. You will find them in mailing houses, print shops, packaging companies and industry.
The technologies in our range
In thermal inkjet (TIJ), the ASTROJET SP2 works with HP printhead technology and water-based pigment ink, and the ASTROJET S1 with a Memjet printhead. The BUSKRO ARGO is a modular HP printhead with a print width of 108 mm per module, up to 1,200 dpi and up to 3.0 m/s, expandable up to 64 modules. The BUSKRO Apollo prints with HP 45 cartridges up to 203.2 mm wide.
You will find piezo heads and UV-curing inks in the BUSKRO Quantum, in the BUSKRO Atom and in the Amica Systems Venus 108. The Quantum prints 108 mm wide, with either water-based or UV ink, and grows modularly up to 432 mm. The Venus 108 reaches 75 to 150 m/min.
The GSI systems work as single-pass inkjet. The GSI NoLabel prints shipping labels directly onto the carton, the GSI Colorize CMYK+W prints CMYK with a white underprint. Both run in a single pass at up to 304 metres per minute.
For colour on envelopes, mailing bags and cartons, there are the ASTROJET S1, the ASTROJET SP2, the Kirk-Rudy FireJet 4c and the brunner br-300-4c available. The br-300-4c stands out above all for its low ink costs. Labels from the roll are printed by the ASTROJET L1.
What matters when choosing
- Material: Paper, carton, corrugated board, film or envelope require different inks.
- Print width and resolution: They depend on the motif and on the readability of the codes.
- Speed: It must match the belt speed of your line.
- Ink type: water-based or UV-curing, depending on the substrate.
- Installation: Standalone unit, inline system or printhead for an existing line.
Every case is different: material, run length and line decide. That is why a personal consultation.
What brunner offers
brunner has been a specialist dealer with its own technical department since 2007. We advise you on the choice of technology, print samples on your own material, install the system and train your team. We remain your contact for service and spare parts, and ink and consumables are available in the shop.
Our systems compared
| System | Print width | Resolution | Speed | Ink |
|---|---|---|---|---|
| BUSKRO Quantum | 108 mm (4.25″) with one head, 216 mm with two heads in the housing | up to 600 × 1,200 dpi | at 300 dpi up to 3.39 m/s (water-based) or 2.54 m/s (UV) | water-based or UV |
| BUSKRO Atom | 25 / 51 / 76 mm depending on model (print height) | 256 / 300 dpi vertical, 100 to 600 dpi horizontal | up to 4.6 m/s (890 fpm), depending on print setting | Solvent or UV, monochrome black |
| BUSKRO Apollo | up to 203.2 mm (4 × 2″) | 600 dpi vertical, horizontal 110 to 660 dpi | – | water- or solvent-based |
| ASTROJET SP2 | 297 mm (A3 width) | 1,200 × 1,200 dpi at 13.5 m/min, 600 × 1,200 dpi at 27 m/min | up to 6,500 A4/h; up to 9,500 envelopes/h in landscape orientation | water-based pigment, 4 × CMYK |
| ASTROJET S1 | 222.8 mm | 1,600 × 1,600 dpi | up to 9,000 envelopes/h or 3,600 pages/h | water-based, 5 × 250 ml (CMYK + K) |
| BUSKRO ARGO | 108 mm (4.25″) per module, up to 64 modules per system | up to 1,200 dpi | up to 3.0 m/s (600 fpm) | water-based, pigment and dye |
| Amica Systems Venus 108 | 54 mm/head (up to 108 mm) | 600 dpi | 75 to 150 m/min | UV or water-based, monochrome |
| Kirk-Rudy FireJet 4c | up to 330 mm (A3+) | 1,600 × 1,600 dpi at 27 m/min, 1,600 × 954 dpi at 46 m/min | up to 46 m/min (at 1,600 × 954 dpi) | water-based pigment CMYK |
| ASTROJET L1 | 216 mm | 1,600 × 1,600 dpi at 15 cm/s, 1,600 × 800 dpi at 30 cm/s | – | water-based dye ink, 5 × 250 ml |
| brunner br-300-4c | 300 mm | – | 28 m/min | water-based, pigment or dye as required |
| GSI Colorize CMYK+W | 108 mm (4.25″) | 180 × 3,600 dpi | 1,000 FPM (304 m/min) | CMYK + white |
| GSI NoLabel | 108 mm (4.25″) | 180 × 3,600 dpi | 1,000 FPM (304 m/min) | Black / white + spot colour |
Values from the data sheets. Details and equipment on the respective system page.
Frequently asked questions
What is a single-pass inkjet printing system?
In the single-pass method, the printhead stays fixed and the product passes it in a single pass. This allows high belt speeds. The GSI NoLabel and GSI Colorize CMYK+W systems work this way and print at up to 304 metres per minute.
How do thermal and piezo inkjet printers differ?
Thermal heads, such as the HP heads in the ASTROJET SP2 and the BUSKRO ARGO, work with water-based ink. Piezo heads, as in the BUSKRO Quantum, process either water-based or UV-curing ink. Which technology suits you depends on material, speed and resolution. Every case is different, and personal advice at https://brunner-mkv.de/kontakt/ is worthwhile.
Is there a UV inkjet printing system for non-porous surfaces?
Yes. The BUSKRO Quantum, the BUSKRO Atom and the Amica Systems Venus 108 work with UV-curing ink. The GSI systems cure with Smart UV. We print a sample on your material in advance so that you can judge the adhesion yourself.
Which marking system prints variable data such as barcodes and batch numbers?
The BUSKRO ARGO prints variable data, barcodes, logos and text directly in the process and uses the Compose 360 software. The BUSKRO Quantum and the GSI NoLabel also print barcodes. The GSI system lists Code 128, Data Matrix and PDF-417.
Can I integrate an inkjet printing system into my existing line?
Yes, several systems are built for this. The BUSKRO Quantum can be installed into existing transport and feeding sections, and the BUSKRO ARGO is used like a building block in printing, marking and dispatch lines. We clarify transport, feeding and interfaces with you.
Not sure which machine is right for you?
We will advise you without obligation and work with you to find the right solution for your requirements.
Get in touch