‹ Back

Guide

HP TIJ 4.0 with 108 mm: what the printhead can do and what it is used for

In short: The HP 108mm Printhead (HP TIJ 4.0 technology, order name HP 2041 108mm Printhead) is a thermal inkjet printhead with 108 mm print width, 2 slots and 10,560 nozzles. It prints with water-based ink at up to 180 m/min at 600 × 1,200 dpi and is used for coding packaging, late-stage personalisation and addressing direct mail. At brunner, it is built into the modular BUSKRO ARGO.

What the HP 108mm Printhead is

The HP 108mm Printhead works on the thermal inkjet (TIJ) principle. HP markets it as HP TIJ 4.0, and the order name is “HP 2041 108mm Printhead”. It prints with water-based ink. The head is intended for industrial use in production and packaging lines: it is mounted in a fixed position on the line, and the material passes it in a single pass.

Technical data at a glance

FeatureValue
Print width108 mm
Resolution1,200 dpi per slot, 2 slots
Nozzles10,560
Speedup to 180 m/min at 600 × 1,200 dpi
Drop volumeapprox. 7 pl
Throw distanceup to 10 mm, up to 7 mm for small text
Print directionvertical or horizontal
Inks per printhead1 or 2
Decap time48 hours in HP internal tests
Inkwater-based, HP 2041 in 775 ml bulk cartridge

The values are taken from the HP data sheet 4AA6-4007ENW of January 2024.

What the values mean in practice

  • Two slots: Each slot prints at 1,200 dpi. The head can work with one or two inks, for example for black and a second colour.
  • Throw distance: A throw distance of up to 10 mm makes it possible to print on cartons and packaging with slight unevenness. For very small text, the distance should be no more than 7 mm.
  • Decap time: In HP internal tests, the nozzles stay open for up to 48 hours, even when nothing is being printed. This helps on lines that stand idle over breaks and weekends.
  • Speed: 180 m/min applies at 600 × 1,200 dpi. At a higher resolution, the achievable speeds are different accordingly.

What the printhead is used for

HP names four fields of application:

  • secondary marking: 1D and 2D codes as well as text on outer cartons and shipping packaging
  • late-stage packaging customisation: a neutral package only receives its design or variant shortly before dispatch
  • wide-format addressing of direct mail
  • replacement for adhesive labels: the print takes over what an applied label used to do

The HP printhead in the BUSKRO ARGO

At brunner, you will find the printhead in the BUSKRO ARGO. The system is built from modules, the ArgoNodes. Each module prints 108 mm wide. One module works as a monochrome printer, two modules print in CMYK, and from three modules the print width is freely selectable, up to 64 modules per system. The modules clip in and can be added to or rearranged.

The ARGO prints downwards, sideways, vertically or horizontally. It works with water-based pigment and dye ink, at up to 1,200 dpi and up to 3.0 m/s, with a throw distance of up to 10 mm. The Compose 360 software controls variable data and shows a layout preview. Typical uses are barcodes, batch codes and graphics on corrugated board and folding cartons, variable content and mandatory marking on labels, personalised addressing, and serialisation with QR and 2D codes.

Integration into the line

A printhead on its own does not print anything. It needs a controller that processes data and line timing, an ink supply and a suitable mount on the conveyor. With the BUSKRO ARGO, these components are part of the system, and the Compose 360 software handles variable data, real-time diagnostics and the layout preview. Printing is vertical or horizontal, downwards or sideways, depending on where there is space on the line.

It is best to plan the installation with a sample: this shows you how your ink looks on your material and whether the distance to the product is right.

What to look out for when choosing

  • Material and surface: porous substrates such as corrugated board behave differently from coated ones. It is best to clarify this with your own sample.
  • Distance and guidance: how evenly does the product run past the head? The permissible distance is limited.
  • Width of the design: is 108 mm enough, or do you need several modules side by side?
  • Colour or black: one module prints monochrome, and CMYK needs at least two.
  • Line downtime: how long does your line stand idle? The decap time plays a role here.
  • Data: where do the variable contents come from, and how are they passed to the printing solution?

Consulting and samples

brunner has been a specialist dealer with its own technical department in Altdorf near Nuremberg since 2007. We advise on selection, print samples on your own material for printing systems, install the machine, train your team and provide service, spare parts and consumables.

Would you like to know what suits your case? Talk to us or request a Sample request .

Frequently asked questions

What does HP TIJ 4.0 mean?

TIJ stands for Thermal Inkjet, that is, thermal inkjet printing. HP TIJ 4.0 designates the current generation of industrial HP printheads. The HP 108mm Printhead belongs to it and prints with water-based ink.

How fast does the HP 108mm Printhead print?

Up to 180 m/min at 600 × 1,200 dpi. Each of the two slots works at 1,200 dpi, and the head has 10,560 nozzles and a drop volume of approx. 7 pl.

What throw distance is possible?

Up to 10 mm, up to 7 mm for small text. Printing is vertical or horizontal, with one or two inks per printhead.

Where can I get a system with the HP 108mm Printhead?

At brunner, the printhead is built into the modular BUSKRO ARGO, with 108 mm print width per module and up to 64 modules per system. We advise you on this and print samples on your material.