In short: A carton printer pays off if you want to save on labels, applicators and pre-printed cartons in many variants. At the workstation, the brunner br-300-4c prints cartons up to 50 mm thick in CMYK; in the line, the GSI NoLabel prints the shipping label directly onto the carton. Which system suits you depends on format, material thickness, volume and design.
Why print directly on cartons
Many shippers today stick labels on cartons: delivery address, barcode, batch code. This requires label stock, an applicator and ribbons, and a label can come off in transit. A carton printer puts the same information directly on the carton. In addition there are logos, graphics and colour designs, for which preprinted cartons in many variants would otherwise sit in the warehouse.
This means machines for printing on card, corrugated board, folding cartons and mailing sleeves in your own premises. A carton printer prints your packaging; it does not replace a printer of cartons.
Three ways: workstation, line, printhead
At the workstation
The brunner br-300-4c stands as a stand-alone machine in your premises. It stands out above all for its low ink costs. It prints cartons, mailing sleeves, folding cartons and sheets in four colours (CMYK), format up to DIN A3, print area 300 mm, material thickness up to 50 mm. The printhead is height-adjustable, and a vacuum belt transports the material without slipping. The ink is water-based, either pigment or dye, and comes from a bulk system with 3.5 litre tanks.
For large runs up to A3+, the Kirk-Rudy FireJet 4c is designed: up to 330 mm print width, water-based pigment ink, material up to 20 mm thick, and the distance to the printhead is adjustable.
Inline in the packaging line
The GSI NoLabel prints the shipping label directly on the carton as it runs along the conveyor: black on a white base print, in a single pass, at up to 304 metres per minute. The GSI Colorize CMYK+W prints in CMYK plus white. Because white is laid under the colours, designs stand out strongly even on brown corrugated board.
As a printhead in the line
If you already have a line and only want to add codes or text, use the BUSKRO ARGO . The modular system with an HP printhead prints 108 mm per module with water-based ink, barcodes, batch codes and graphics on corrugated board and folding cartons.
The systems compared
| System | Application | Print width | Resolution | Speed |
|---|---|---|---|---|
| brunner br-300-4c | workstation, CMYK, material up to 50 mm | 300 mm | 1,200 × 1,200 dpi | 28 m/min |
| Kirk-Rudy FireJet 4c | large runs, CMYK, material up to 20 mm | up to 330 mm | 1,600 × 1,600 dpi at 27 m/min, 1,600 × 954 dpi at 46 m/min | up to 46 m/min |
| GSI NoLabel | inline, black on white | 108 mm | 180 × 3,600 dpi | up to 304 m/min |
| GSI Colorize CMYK+W | inline, CMYK plus white | 108 mm | 180 × 3,600 dpi | up to 304 m/min |
| BUSKRO ARGO | modular printhead in the line | 108 mm per module, up to 64 modules | up to 1,200 dpi | up to 3.0 m/s |
When a carton printer is worthwhile
A carton printer is a good option if at least one of these situations applies to you:
- You keep preprinted cartons in many variants in stock and would like to print neutral cartons only when needed.
- You apply large quantities of shipping labels and would like to save label stock, ribbons and the applicator.
- Labels come off in transit or on rough corrugated board.
- Your jobs change often, for example with changing designs, addresses or batches.
Whether this pays off for your business depends on volume, material and your current effort. A reliable statement on this is only possible with your figures.
What to look out for when choosing
- Format and material thickness: How large and how thick are your cartons? The systems process material up to 50 mm and up to 20 mm thick respectively.
- Stand-alone unit or line: Does the carton run past at a station or along the conveyor?
- Substrate: On brown corrugated board, colours need a white base print.
- Content: Are addresses and barcodes enough, or should a colour design go on it?
- Feeding and stacking: You will find the suitable feeders and conveyors under Transport and feeding.
Every case is different: material, run length and line decide. That is why a personal consultation.
Consulting and samples on your material
You will find all systems under Printing on cartons. brunner has been a specialist dealer with its own technical department in Altdorf near Nuremberg since 2007. We advise you on the right machine, print samples on your own carton for printing systems, install, train your team and supply service, spare parts and ink.
Would you like to know what suits your case? Talk to us or request a Sample request .
Frequently asked questions
Can you print directly on cartons with a digital printer?
Yes. The brunner br-300-4c, which stands out above all for its low ink costs, prints cartons, mailing sleeves and folding cartons in CMYK, format up to DIN A3 and material thickness up to 50 mm. For use in the line, there are the GSI Colorize CMYK+W and the BUSKRO ARGO.
Can I print shipping labels directly onto the carton?
Yes, with the GSI NoLabel. It prints the shipping label directly on the carton in a single pass, black on a white base print, at up to 304 metres per minute. Label paper, ribbons and applicators are no longer needed.
How do you print brown corrugated board in colour?
With a white base print under the colours. The GSI Colorize CMYK+W prints CMYK plus white in a single pass, so designs come out in colour even on brown carton.
How thick can a carton be for printing?
That depends on the system. The brunner br-300-4c processes material up to 50 mm thick, the Kirk-Rudy FireJet 4c up to 20 mm. Tell us your carton formats and we will recommend a suitable system.
