BGM Elite 410 Label-i
Automatic inspection slitter rewinder: inspects 100 % of labels and slits and rewinds at up to 300 m/min.
Price on request · Individual advice & configuration by our team
Highlights & benefits
- 100 % inspection, defects are moved to and removed
- Up to 300 m/min
- Paper, clear-on-clear and films
- Automatic acceleration and braking
Description & applications
The BGM Elite 410 Label-i inspects printed labels with a camera. It can do everything an iSR machine can do, but in doing so compares every printed label with the master. If one deviates, the machine stops and moves to the spot so that it can be removed. Defective labels are thus detected and removed before the roll leaves the building.
How the material runs through
All steps in a single pass.
The difference from sampling is an economic one: anyone producing for pharmaceuticals, food or cosmetics must be able to prove that no defective labels were delivered. The Label-i inspects 100 per cent and brakes via a web accumulator so that web tension stays constant even when stopping; otherwise the material distorts at exactly the spot you want to examine. Inspecting, slitting and rewinding happen in a single pass, so no second handling is needed. The machine runs at up to 300 m/min, and the unwinder takes rolls up to Ø 700 mm or 2,700 linear metres.
A note about ourselves: For the 410, the manufacturer's documentation does not yet give a final specification of the camera system. For the Elite 450 Label-i it is the E+L 200 % MIS2 with master comparison. We will clarify which system is fitted in your machine as binding with your enquiry and list it separately in the quote.
Why choose the Elite 410 Label-i
- Less waste: fully integrated 100 % inspection.
- Save time: automated inspection at up to 300 m/min.
- Efficient operation: slitting and rewinding of films without a carrier.
- Higher productivity: acceleration and braking adjust automatically, and a web accumulator brakes with precise positioning at the defect table.
The Elite range is developed by Bar Graphic Machinery in Bradford and manufactured entirely in its own plant; BGM has been part of the Duplo Group since 1 August 2025. The manufacturer provides a 36-month warranty on parts it makes itself. As sales and service partner for Germany, Austria and Switzerland, we take care of specification, installation, training and service. If you do not need camera inspection, the Elite 410 iSR is the leaner solution. All machines in this department can be found under Label finishing.
Technical data
- Web width
- 410 mm
- Speed
- up to 300 m/min
- Unwinder
- Ø 700 mm, 2,700 linear m
- Inspection
- Camera with master comparison, system to be specified on enquiry
- Defect handling
- Positioning and removal table
- Web tension
- Web accumulator for gentle braking
- Cutting system
- Shear cut, knives in cassettes
- Minimum cutting width
- 13 mm
- Rewind shaft
- Air shaft 76 mm (3 inch)
- Connection
- 230 V, 13 A, single-phase
Information based on manufacturer's documentation. Subject to change in technology and design. Only the information in the respective quote is binding.
Interesse an der BGM Elite 410 Label-i?
We will be happy to advise you personally, prepare a suitable quote and set up the system individually for your application, including installation, training and service.
